MONT
3. Chinese / English Switching
By switching on/off this switch, you can set
the system language to English / Chinese.
4. Reset
By switching on “Reset”, you can reset the
controller to factory settings.
(2) Dual time period control
As the interface shows, the load will be on for
1 minute after sunset (solar panel voltage
decreases to 5V) and be on for 0 minute before
sunrise (solar panel voltage reaches 6V). The
load working time duration can be set up.
(3) Time period control
In this interface, you can set up load working
time period.
To Next Page
Loading...