MONT
Interface 01: Battery Type Setting
b00: lead-acid battery custom;
b01: sealed battery;
b02: flooded battery;
b03: gel battery;
b04: lithium battery custom;
Note: For b04, CV (constant voltage charging) voltage and RCV (recovery charging voltage) should
be set up manually.
b05: 3.2V*4 series of LiFePO4;
b06: 3.2V*5 series of LiFePO4;
b07: 3.7V*3 series ternary lithium battery;
b08: 3.7V*4 series ternary lithium battery.
Note: Charging parameters cannot be set up from b05 to b08.
PARAMETER SETTING
Interface 02: Battery Voltage Setting
Battery voltage can be auto recognized or manually set.
To Next Page
Loading...