13
CLEANING THE TURBO BRUSH
Open the latch of the brush.
Remove the plastic bar, and then remove the brush.
Remove the tangled on the brush hair, thread and other debris.
Rinse the brush under running water and give it time to dry.
Install the brush into place and secure the latch.
1.
2.
3.
4.
5.
SPECIFICATIONS
Supply voltage
220-240 V/50 Hz
Power
150 W
Suction power
60 W
Dust collector capacity
0,35 L
Battery
Li-Ion
Voltage
22,2 V
Battery capacity
2200 mAh
Full charge time
4-5 h
Noise level
≤70 dB
Weight
2,6 kg
Size
345x112x210 mm
This appliance is to be stored and used under the following conditions: tempe-
rature – not less than +5°C; relative humidity - not higher than 80%; aggressive
impurities in the air: not allowable.
As the Manufacturer is constantly working on the improvement of its products,
the design and technical specifications are subject to change without prior
notice.
To Next Page
Loading...