Dcm MC-HD200 - Page 35

34
Optional items:On,Off
SpeedByZ On:Zoom PTZ the larger of the focal
length,camera P / T moving more slowly.
L/R Set:Reverse setting remote control,Optional
items:STD,REV(When set to REV, remote control or
reverse)
AF-Zone:Interested in focusing area,Optional
items: Center,Bottom,Top
AF-Sense:Automatic focusing sensitivity
options, Optional items:Low,Normal,High
6. NOISE REDUCTION
Move the cursor to the Noise Reduction item in
the main menu and press [HOME] button,NOISE
REDUCTION menu appears,as shown in the
following figure.
NR2D-Level:2D noise reduction. Optional items:
Off,1 ~ 5
NR3D-Level:3D noise reduction. Optional items:
Off,1 ~ 5
D-HotPixel:Dynamic bad points,Optional items:
Off,Auto, 1 ~ 5
DarkDetail:Shadow detail, Optional items: 0~15
Note:
The higher the noise reduction’s level,the more
of the image details lose.
7. SETUP
Move the cursor to the Setup item in the main
NOISE REDUCTION
NR2D-Level 4
NR3D-Level 3
D-HotPixel Off
DarkDetail 1
Select Item
Change Value
[Menu] Back