17
STEP 1
Place the cylinder restraint in the island (Fig. 14).
STEP 2
Locate the cylinder restraint in the island within the recommended
area
(Fig. 13 and 15).
STEP 3
Once located, secure to the bottom of the island using all eight hole
locations provided on the restraint. Wood screws can be used for
wooden floors or 1/4” (6mm) diameter anchor screws or bolts may be
used if the floor is concrete or masonry (Fig. 16).
STEP 4
When secure, place the LPG cylinder into the cylinder restraint mak-
ing sure to seat the cylinder all the way down, securely affixing the
cylinder in the restraint (Fig. 17).
STEP 5
Attach the regulator hose assembly and operate the grill normally as
described in the manual (Fig. 18).
INSTALLATION
GAS HOOKUP
FIG. 18
FIG. 14
FIG. 15
FIG. 16
FIG. 17
To Next Page
Loading...
