To Next Page
H
Heather SimpsonJul 31, 2025
What to do if one or more burners will not light on my DCS Ranges?
- RRobert SmithJul 31, 2025
If your DCS Ranges burners won't light, several factors could be at play. First, ensure that the unit has electricity by checking the circuit breakers. Then, verify the gas supply at the wall. Confirm you're using the correct gas type. If the burners are dirty, clean them. Misaligned burners should be aligned and reassembled. If there's water in the burners, disassemble and dry them. A dirty electrode should be cleaned. If these steps don't resolve the issue, it may be necessary to contact an authorized service.
General
