False triggering occurs when a trigger is engaged accidentally, often due to stage
vibrations. The Threshold setting can help prevent false triggering. High Threshold
values will require you to hit the pad harder to register a note. Threshold should be
set based on your playing style so please try different Threshold settings until you find
one that works best for you.
How to change trigger Threshold:
1. Select the trigger you would like to edit by striking the trigger/pad.
2. Use the function up/down buttons to select Threshold.
3. Use the value up/down buttons to dial in the desired Threshold value. The
value will be loaded automatically.
REMEMBER TO SAVE YOUR CHANGES BY GOING BACK TO KIT!
To Next Page
Loading...