If your hardware or software program does
not completely open or close your hi-hat
sounds as it should as your foot moves
through the range of your variable-position
hi-hat pedal, the DDTi probably needs to
be calibrated to match the output of your
particular pedal.
Perform the calibration procedure
described in the "X-Talk" discussion on
page 17 of this manual. Begin with the
DDTi’s automatic calibration feature (as
described on that page). This procedure
typically results in an excellent match
between your pedal and the DDTi. To
really dial in your pedal's performance,
experiment to see if other calibration
values (selected by using the up and
down buttons within the "X-Talk"
parameter) result in even better
performance for your particular pedal type
and playing style
To Next Page
Loading...