De Agostini Model Space C57 - Detailing the tender 4; Your parts & Tools; Step 1: Coupling Buffer Attachment

Tools
Where your parts t
190
Step by step: Stage 83
Detailing the tender 4
Tender upper plate
Buer
Coupling buer
Brake hose
Drawbar pin
Screws (2 x 4mm) x 7
Phillips screwdriver
Synthetic rubber adhesive (SRA)
Tweezers
Pliers
1
Familiarise yourself with the coupling
buer using the photo above as a guide.
Line the part up to the circled holes at the
rear of the tender.
Use two 2 x 4mm screws to secure it.
Your parts
Shorter side on top
Tender upper plate
Brake hoseBuer