23
2 PRODUCT DESCRIPTION
Models and contents of the package
All automated models involve the use of advanced control units (NET series) equipped with anti-crushing sensor, built-in 433 MHz
radio receiver, speed control and slow down in opening and closing. The LIVI 3/24 models are intended primarily for residential / condo-
minium and Semi-intensive/intensive use depending on the duty cycle foreseen for the automation.
LIVI 3/24 is completed by a set of accessories listed in the “PRODUCT ACCESSORIES” table (page 166).
LIVI 3/24 is composed of a mechanical gear motor which rotates the driving gear; This gear, coupled to the rack properly installed on
the gate, converts the circular motion of the gear motor into rectilinear motion thus allowing the movement of the gate on its own guide.
Inspect the “Contents of the Package” (Pic. 1) and compare it with your product for useful consultation during assembly.
Transport
LIVI 3/24 is always delivered packed in boxes that provide adequate protection to the product, however, pay attention to all informa-
tion that may be provided on the same box for storage and handling.
3 TECHNICAL DATA
NET3/24N
Power supply (V) 220 - 240 V ~ ±10% (50/60 Hz)
Rated power transformer (VA) 80 VA (230/22V)
Fuse F1 (A) T1A 250V (retarded)
Stabilized output for auxiliary power supply 24 V
max 200mA
24V Flashing light output 24 V max 5 W
“Warning” output 24 V max 5 W
Receiver frequency 433,92 MHz
Transmitters type of coding HCS x-code - HCS rolling code - Dip-switch (selectable)
Max remote controllers managed 100
CONTROL BOARD
3/24E/F
Motor power supply voltage (V) 24 V
Absorbed power (W) 55
Max Thrust (N) 140
Duty cycle (leaf L=5m) 8 cycles/hour
Maximum n° of operations in 24 hour (leaf L=5m) 20
Max door weight (kg) 350
Operating temperature range (°C) -20÷50 °C
Opening speed (m/min) 14
Weight of product with package (Kg) 11,5
Sound pressure emitted (dBA) < 70
Protection degree IPX4
OPERATOR
To Next Page
Loading...
