399
09
Lay the sticker out on a cutting
mat and very carefully trim any
excess away from the lettering using a
craft knife. Go as close to the lettering as
you can.
10
Next, cut out the rst straight
PIRELLI sticker from the sheet
using scissors.
11
As you did for Step 9, trim the
excess from the sticker using the
craft knife.
06
If you are choosing to apply the
stickers to the tyres, begin by
removing the front left wheel and tyre by
loosening the wheel nut with the
cross wrench.
07
Rest the wheel on your work
surface with the inner edge
facing up.
08
Carefully cut out the rst curved
P ZERO sticker from the sticker
sheet supplied with Stage 78.
To Next Page
Loading...
