5 COLLECTING DATA EC-5
2. Unzip the folder EchoCSI.zip.
3. Locate the file containing SCWin.exe. It should be in C:\Program
Files\Campbellsci\SCWin. Place the following files from the
unzipped EchoCSI.zip folder into the folder with SCWin.exe.
• AM1632Z.MUX
• AM416Z.MUX
• EC10.SCS
• EC101632.SCS
• EC10416.SCS
• EC20.SCS
• EC201632.SCS
• EC20416.SCS
• EC5.SCS
• EC5632.SCS
• EC5416.SCS
• SCWIN-DECAGON.CNT
• SCWIN-DECAGON.HLP
Note: If you are not able to find this directory path, search for
the folder that contains SCWIN.exe and place the files into that
folder.
4. Open up SCWin.exe (Short Cut). If you are using a V.3 copy
of LoggerNet, there is a tab for SCWin (Short Cut) on the tool
bar.
5. Select New to start a new program to read the EC-5.
(a) Select the data logger you will be using to read the sensors.
(b) Select the measurement interval (a shorter measurement
interval, i.e. 1 sec., is sometimes desirable when testing
the sensor).
12
To Next Page
Loading...