Need help?Do you have a question about the Deckma Hamburg OMD-24 Series and is the answer not in the manual?
Guidance on using the manual and procedures for disposing of the OMD-24 unit.
Explanation of the safety and warning symbols used throughout the manual.
Details mechanical, electrical, thermal, and chemical hazards of the OMD-24 Series.
Lists recommended measures and risk levels to mitigate identified hazards.
Covers general product information, service exchange unit procedures, and remarks.
Outlines the warranty period, coverage, and conditions for the OMD-24 Series.
Overview of the OMD-24 Series and essential notes for installation and operation.
Explains working principles: touch panel, measuring, display, alarms, and adjustment.
Presents technical specifications for the standard OMD-24 model.
Details construction, mounting, piping, and cabling for the OMD-24.
Presents technical specifications for the OMD-24 EV, including electric valve features.
Details construction, mounting, piping, and cabling for the OMD-24 EV.
Presents technical specifications for the OMD-24 EVA, featuring EV and auto-clean.
Details construction, mounting, piping, and cabling for the OMD-24 EVA.
Presents technical specifications for the OMD-24 A, featuring auto-clean.
Details construction, mounting, piping, and cabling for the OMD-24 A.
Details specifications and operating principles for the OMD-24 FC conversion kit.
Covers electrical installation and piping for the OMD-24 FC conversion kit.
Describes manual cleaning unit (MCU) and automatic cell cleaning device options.
Details the function of each terminal on the OMD-24 unit.
Explains integration of the OMD-24 with external control systems.
Steps for verifying electrical and piping during commissioning.
Specifies power supply voltage and fuse rating for the OMD-24.
Details the sequence for starting up the OMD-24 instrument.
Explains how to adjust flow rate for optimal instrument performance.
Covers setting alarms, delays, offset, and output signals.
Details operation and settings of the Auto Clean Control Unit.
Explains air pressure regulation for the automatic cleaning system.
Describes standard drainage system operation for condensate removal.
Guidance on normal operation of OMD-24 Series instruments.
Discusses recommended methods for measuring cell cleaning.
Covers routine checks for instrument condition and normal operation.
Details checking the desiccator and its humidity levels.
Outlines standard and intensive cleaning procedures for the measuring cell.
Describes system test procedure and data logger checks.
Covers maintenance for MCU and automatic cell cleaning devices.
Instructions for checking data logger recording and clock.
Details functions of navigation and functional buttons on the display.
Explains navigation and use of programming mode for settings.
Information on memory card location, function, and registration.
Provides an overview of common malfunctions and their indications.
Lists common faults for the auto cell cleaning unit and their solutions.
Details electronic sealing and calibration access for OMD-24 series.
Explains repeatability checks and function tests for surveys.
Lists spare parts with part numbers for OMD-24 models.
Details optional equipment for OMD-24 series with part numbers.
Detailed explanation of navigation buttons and display status.
Illustrates alarm working principles and LED indications.
Quick checklist for operator maintenance tasks.
References Servicing and Cleaning Manual for detailed procedures.
General| Sampling points | 1 |
|---|---|
| Display | LCD |
| Alarm Indication | Visual and audible |
| Alarm levels | Adjustable |
| Outputs | 4-20 mA |
| Power supply | 24 V DC |
| Relative Humidity | Up to 95% non-condensing |
To Next Page
