Dedoes Alliance - Run Alliance Machine in Bypass Mode

How to run your Alliance machine in bypass
It may be necessary to run your Alliance machine in bypass mode to help
determine if you are having a motor or a mer issue. Bypass mode will bypass
the mer and allow the motor to operate without the use of the mer.
To operate your machine in bypass:
1. Turn off the power to your Alliance mixing machine.
2. While the mer remains plugged into the motor, remove it from the machine.
3. Disconnect the GREEN wire from the locaon labeled “GREEN”.
CAUTION: Use care when disconnecng the wires as the connecons are
very ght and damage to the wires or connectors may result.
4. Connect the GREEN wire into the locaon labeled “BYPASS (GREEN)”.
5. Turn power on to the machine.
Once you restore power to the machine the motor should begin to operate
without having to use the mer.
Note: The bypass operaon is for diagnosing motor or mer problems. It is not
intended to be used for normal operaon of the mixing machine. Running the
motor in bypass for extended periods will damage the motor.
If you are having trouble with your machine turning ON or OFF please contact
the Dedoes Customer Service Department at 1-248-624-7710 and we will be
happy to help you resolve your issue.