Deenkee I7 - Product Maintenance; Magnetic Stripe’s Usage; Daily Storage; Cleaning of Charging Pole Pieces

4.5 Magnetic Stripe’s Usage
1.Measure
and cut
Magnetic Stripe
to your desired
length.
2.Firmly place
Magnetic Stripe
on the ground to
create a barrier.
3. Vacuum Cleaner
will not pass over
the Magnetic
Stripe.
Note:
Robotic Vacuum Cleaner might go half way over the Magnetic Stripe before the
sensor is triggered and it turn around.
5.1 Daily Storage
5.2 Cleaning of Charging Pole Pieces
5.3 Clean the Dust Box
5.3.1 Assembly and Disassembly of Dustbin
5. Product Maintenance
If do not use the cleaner for a long time please fully
charge the battery first and store it in a dry place.
1. Please turn off the power switch or disconnect the
power plug first.
2. Please clean the charging pole pieces monthly with
dry cloth.
3. Do not use oil for scrubbing.
Press and hold the dustbin button and then take out the dustbin.
- 15 -
Charging
Pole Pieces