DSE8610 MKII Operator Manual
Amendments List Continued
Corrected imperial distances.
Updated J1939-75 Specification, Applicable Standards and DSE Four Steps to
Synchronising
Added Additional Droop Commissioning Screen, MSC Connect DSE8610s Screen,
Droop and Load Demand Scheme Operation, DSE Steps to Successful Loadsharing.
Added: Power De-Rate, New MSC screens, new PLC Instruments screens, Simulate
Injection Testing, Fault Ride Through, updates in the FPE & Running Editor…
Updated to module firmware V7.0, features include: Load Demand Compatibility
option, CAN AVR comms, and more…
Added: new UL Requirements & part numbering
Updated to module firmware V7.7, features include: connecting to DSE2610 Remote
Display through the Ethernet or RS232.
Typeface: The typeface used in this document is Arial. Care must be taken not to mistake the upper-case letter I with the numeral 1. The numeral
1 has a top serif to avoid this confusion.
To Next Page
Loading...