3.5.2 MULTI GENERATORS FOR PRIME POWER USING LOAD-SHARE LINES
NOTE: The below diagram is available in a larger scale. Contact DSE technical support for further information,
support@deepseaelectronics.com.
NOTE: To use analogue loadshare lines from external Load Share Units, each DSE8x10 MKII must be fitted with a DSE123 to convert its MSC
link. It is advised that the system is controlled by an external third-party Logic Controller to provide automatic start/stop facilities and protections.
For further information, refer to DSE Publication: 057-003 DSE123 Operators Manual or contact DSE technical support
support@deepseaelectronics.com.
To Next Page
Loading...