DeFelsko PosiTest AT-A - Sync Batches for PosiTector App; Send Batches to PosiTector App; Software Updates and Reset Warning

13
Memory Menu
New Batch
Open
Close
Delete
Closes any currently opened batch and creates a new memor
y
batch, named using the lowest available number (example: B2
)
.
New batches are date stamped when they are created.
PosiTest AT-A
The PosiTest AT-A stores 100,000 readings in up to 1,000 batches
.
Stored measurements can be reviewed on-screen or accessed vi
a
computers, tablets and smart phones.
For further details on memory options, refer to the full
instruction manual at:
NOTE:
Selects a previously created batch to open and make current.
Stops the recording process, closes the current batch, and
removes batch information from the display.
Removes a batch and associated measurements from memory.
Setup Menu
Pull Parameters
Dolly Size: Select the dolly size being utilized for the test (10,
14, 20 or 50 mm)
Rate: User selectable pull rate (unit/sec). Specified rate is
maintained for the duration of the test.
Limit: Pressure will build-up until the set Limit is reached or th
e
dolly is pulled from the surface, whichever occurs first. By defaul
t
,
the instrument will pull to maximum for selected dolly size (se
e
Technical Specifications pg. 16).
Select desired parameter using the buttons or touch
screen. Use the and buttons to adjust.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com