15
The instrument automatically attempts synchronization with
PosiSoft.net when initially connected via USB to a PC running
PosiSoft Desktop Manager.
Additional measurements added to memory while
connected are synchronized only when the USB cable is
disconnected, then reconnected or when the Sync Now option is
selected.
Connect Menu
The instrument uses a USB mass storage device which provides a
simple interface to retrieve data in a manner similar to USB flash
drives, cameras or digital audio players.
When checked, any computer can view readings stored in memory
by navigating a virtual drive labeled “PosiTest” using the included
USB cable.
A formatted HTML report is viewed by selecting the "index.html" or
“START_HERE.html” file found in the root directory. Optionally, text
".txt" files located in each batch folder provide access to
measurement values. Stored readings and graphs can be viewed
or copied using universal PC/Mac web browsers or file explorers.
The last 10 screen captures (pg. 7) stored in memory can be
accessed by navigating to the “screen_capture” directory.
When your PosiTest AT-A is first connected to your Windows PC
via a USB cable, an enumeration process is started that installs
device drivers without re-booting your computer. You may see
several pop-up windows in the taskbar at the bottom right of your
screen. Wait for the entire process to be completed before
proceeding.
USB Drive
PosiSoft.net
PosiTest AT-A
Select Sync Now to immediately synchronize stored
measurement data via USB or WiFi to PosiSoft.net (pg.14).
PosiSoft Desktop Manager and an internet connection are
required when using USB.
NOTE:
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
