DeFelsko PosiTest AT-A - Returning for Service; Limited Warranty Information

16
Allows communication with a smart device running the PosiTecto
r
App (pg.18) via wireless technology. No pairin
g
required. When connected, measurement data is automatical
l
y
transfered. Select Send Batch to manually transfer batche
s
(useful when switching between smart devices).
WiFi technology wirelessly communicates with PosiSoft.ne
t
,
downloads software updates, and provides access the PosiTes
t
AT-A’s stored measurement data using standard web browsers.
On/Off : Turns WiFi functionality On. Press it again t
o
deactivate WiFi.
Networks: Available networks detected by the instrument ar
e
listed on the screen along with any networks that have previousl
y
been connected to that are not currently within connection range
.
If the network is secure, the password must be entered (if unknown
,
contact the Network Administrator). Use the QWERTY keyboard t
o
enter the password, then press OK. Select Connect to establish th
e
WiFi connection. When connected the icon will appear on th
e
display.
Information: Displays information about the local WiFi networ
k
connection including...
-SSID: the network’s name
-State: displays if the Gage is connected to the network or not
-IP Address: the IP Address provided by the network
-IP Settings: allows manual entry of network information
Any WiFi enabled device connected to the same network can view th
e
PosiTest AT-A’s built-in mass storage drive. Using your device’s we
b
browser, enter the IP address of your PosiTest AT-A to access th
e
drive. For complete details see:
WiFi
Bluetooth Smart
PosiTest AT-
A
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com