Defender GUARD PRO PTZ - Setting Up Your Camera; Connect to Wi-Fi and Pair Your Camera

To Next Page

To Previous Page

SETTING UP YOUR CAMERA

Step 1: Connect to Wi-Fi and Pair Your Camera

IMPORTANT: Before pairing, ensure your phone is connected to a 2.4 GHz Wi-Fi network

Tap + to add your camera, then tap “Scan QR code”.

Note: If your mobile device cannot scan the QR code, tap “Add Manually”

Scan the QR Code on the camera and tap “Next” to Proceed.

Note: We recommend saving the QR code image in the event the QR code

label on the camera gets damaged.

Wait for the camera LED to ash green slowly. Tap “Next” to proceed.

Guard PRO