3 HOMEDEPOT.com
Please contact 1-866-308-3976 for further assistance.
Pre-Installation
PLANNING INSTALLATION
Before installing the replacement motion sensor, ensure that all parts are present. Compare parts with the Hardware
Included and Package Contents sections. If any part is missing or damaged, do not attempt to assemble, install, or
operate this light fixture.
Estimated installation time: 30 minutes
SPECIFICATIONS
Range
Up to 50 ft. (15.2 m) - Varies with surrounding temperature
Sensing angle
Up to 240°
Power requirements
120 VAC, 60 Hz
Sensitivity Low Med High
On-Time Test, 1Min 5Min 20Min
DualBrite timer
ON-6 Hours or OFF
TOOLS REQUIRED
Phillips
screwdriver
Flathead
screwdriver
Pliers
Wire strippers/
cutters
Circuit tester Work gloves
Electrical tape Silicone sealant Ladder
Safety goggles
To Next Page
Loading...