CONVENIENT SPIN ONLY SELECTION
Press the POWER ON pad.
Press the CONTROL pad.
Press the START HOLD pad.
BEFORE ANY OF THE WASH OPTIONS ARE SELECTED YOU MUST FIRST:
• Insert the power plug into an earthed wall socket and switch on.
• Open the hot and cold water taps.
• Load the washing into the machine. (see Loading)
• Add detergent and if necessary softener and bleach. (See Adding detergents)
• Close the lid.
• NOTE: DO NOT OPEN THE HOT WATER TAP BY ITSELF.
• IT IS ESSENTIAL TO OPEN THE COLD WATER TAP FOR ALL
PROGRAMMES. THE MACHINE RINSES IN COLD WATER EVEN WHEN
USING A HOT WASH.
HOT
OPTIONAL
COLD
CONTROL
SPIN ONLY
START
HOLD
To Next Page
Loading...
