EasyManua.ls Logo

Defy 850 - Operating Procedure; Loading Detergent; Adding Bleach; Adding Softener

Defy 850
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATING PROCEDURE
LOADING DETERGENT
Only use detergents specifically designed for top loading automatic washing
machines.
Gently pull the detergent drawer open.
Pour the detergent, the quantity of which is dependent on the wash load, into the
detergent drawer and close the drawer.
ADDING BLEACH
If desired, liquid chlorine bleach may be added
to the bleach inlet as marked on the machine.
Do not allow bleach to spill onto clothing in the
tub as undiluted bleach will damage the fabrics.
The machine will automatically dispense the
bleach at the appropriate time during the wash
cycle.
ADDING SOFTENER
If desired liquid fabric softener may be added
to the softener dispense located on the rim of
the tub.
Pour an amount of softener, as recommended
by the manufacturer, into the dispenser.
Avoid spilling the softener on fabrics in the
wash tub.
The machine will automatically dispense the softener at the appropriate time during
the final rinse.
STARTING THE MACHINE
Close the lid.
Press the POWER ON pad.
Select the desired wash cycle (either fully automatic FUZZY or any of the pre-
programmed washes BLANKET, ECONOMY, WOOL, SOAK or any customised
programme).
Press the START / HOLD pad.
The machine will complete the selected programme.

Related product manuals