Page 10
Important: Have somebody to
assist you when moving the
refrigerator and to hold the doors
when removing / re-fitting hinges
and doors to avoid injury and
damage to the product
Please refer to diagrams supplied.
Reversing The Doors
We recommend that you reverse doors (if
required) before switching on for the first
time.
Tools required:
Small and medium size screwdrivers and a
pair of pliers.
Spare Parts:
The following parts, which are exclusively for
left hand side fitted hinge operation, are
available from a Defy spares outlet:
Upper door top trim hinge covers – there are
2 different parts, one for each side of the top
trim.
Upper door middle hinge bushing/ door
stopper assembly.
Keep all the parts which have been removed
when reversing the doors in a safe place for
possible future re-use.
Figures represented in this
instruction manual are schematic
and may not correspond exactly
with your refrigerator.
If the parts are not included in the
refrigerator you have purchased,
they may be model specific and
therefore only valid for some
models.
To Next Page
Loading...
Need help?
General
