PAGE 13 OF 24
OPERATING INSTRUCTIONS
• When the oven is first plugged in, a beep will sound and the display will show”1:01”.
• During the cooking setup process, the oven will return to standby mode after a period of 25 seconds.
• During cooking, press the STOP/CANCEL pad once, the program will pause, then press the START pad
to resume, to cancel the program press the STOP/CANCEL pad twice.
• After the cooking process has ended, the screen will display End and will emit a sound every two
minutes until the STOP/CANCEL button is pressed or the door is opened.
• The buzzer will sound once when selecting a valid operation. If an invalid button is pressed, the buzzer
will sound twice.
Setting the Clock
• This is a 12 or 24 hour clock. Select the clock by pressing the CLOCK pad.
• In standby mode, press the CLOCK pad once or twice to select 12 or 24 hour clock.
• Make use of the number pads to enter the correct time.
• Press the CLOCK pad again to confirm.
NOTE: During cooking, the current clock time may be checked by pressing the CLOCK pad.
Setting the Kitchen Timer
• Press the KITCHEN TIMER pad once.
• Enter the required amount of time by pressing the number pads. The maximum time is 99 minutes and
99 seconds.
• Press START to confirm.
NOTE: When the countdown ends, the buzzer will sound as a reminder. The timer countdown can
be seen in the display by pressing the KITCHEN TIMER pad, if the STOP/CANCEL pad is pressed when
the display is showing the time, the program will be cancelled.
Microwave Cooking
• In standby mode, press the TIME COOK pad once.
• Use the number pads to enter the required cooking time. The longest time is 99 minutes 99 seconds.
• To set a power level other than 100% power, press the POWER LEVEL pad once, then use the number
pads to enter the required power level.
• Press the START pad to confirm.
Use single digit to set a cooking power level:
Number pad Cooking power (Display) Number pad Cooking power (Display)
1,0 100% (P100) 4 40% (P40)
9 90% (P90) 3 30% (P30)
8 80% (P80) 2 20% (P20)
7 70% (P70) 1 10% (P10)
6 60% (P60) 0 0% (P00)
5 50% (P50)
NOTE: During the cooking process, the current cooking power level can be seen by pressing the
POWER LEVEL pad
To Next Page
Loading...
