Page 11
Using a screwdriver, remove the screw of
the upper hinge cover of the door you want
to adjust.
Adjust the door as required by loosening the
screws.
Set the door you have adjusted by tightening
the screws. Be careful not to change the
door position whilst tightening the screws.
Replace the hinge cover and fasten with the
securing screw.
Adjusting the gap on the upper door
You can adjust the gap between the fridge
compartment doors as illustrated in the
figures.
The door shelves should be empty when
adjusting the door height.
Important! Before removing hinge
covers switch off the refrigerator power
as there are wires in the hinge cover of the
To Next Page
Loading...
Need help?
General
