CONGRATULATIONS
You are now the proud owner of one of the finest and most modern tumble dryers that
today’s technology can produce. You and your machine are going to make a great team
together. But first it will pay if you really get to know each other. This book will tell you
all you need to know about your tumble dryer, what it will do and how to do it. Please
read all the instructions carefully before operating the machine.
INSTALLATION
Floor Standing
• Remove all packaging, plastic bag, and transit tape.
• The tumble dryer should be placed in a well ventilated area. If the Dryer is operated in a
confined space, moisture extracted from the clothing during the drying process will
condense on the walls.
• The rear of the Dryer must be free of any restrictions, especially round the fresh air grille.
Do not position the Dryer near any long curtains or drapes as these could be drawn against
the air intake grille. This would result in a much longer drying time
• Allow a 100mm. Air-gap at the rear of the Dryer for ventillation purposes.
Wall Mounted
• A wall mounting kit, Part number 061406 comprising a mounting bracket and two
cabinet spacers, is available from the nearest Defy Service Centre.
•
Electrical
• The dryer is designed to operate on a 230 volt, 50 Hz, 15 Amp, AC power supply.
• The machine should be connected to an earthed 3 pin wall socket.
• If the power-cord should ever need replacing, use only a genuine cord available from
the nearest Defy Service Centre.
The appliance must be earthed and the manufacturer and seller do not
accept responsibility for any damage due to incorrect electrical connection.
To Next Page
Loading...
