9
FIRMWARE UPGRADE
1. Download the upgrade firmware from our website to a
computer.
2. Use the provided USB cable to connect the unit to the
computer and transfer the data to the unit.
3. Turn on the unit and select [Firmware upgrade] in
system setting mode
4. Press the [MENU] button and select [Local folder] to
enter firmware upgrade software.
Note:
After finishing the firmware upgrade, please remove the
battery from the unit for a few seconds.
DATE FORMAT
Select [Date Format] in [Sys Set], press the [MENU] button to
enter below display
- yyyy mm dd (year, month, day)
- mm dd yyyy (month, day, year)
- dd mm yyyy (day, month, year)
- Exit
TIME FORMAT
Select [Time Format] in [Sys Set] mode, repeat pressing on
the [MEMU] button to select either 12H or 24H format, then
wait for around 3 seconds to auto confirm and exist the
setting.
To Next Page
Loading...