EasyManua.ls Logo

DEGEN DE1126 - WORKING WITH STATION MEMORIES; Storing Stations Manually; Auto Tuning Storage (ATS)

DEGEN DE1126
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
until the stereo symbol appears; press and hold again to
deactivate it.
WORKING WITH STATION MEMORIES
This unit can store 248 stations with the following memory
location:
MEMORY LOCATIONS
FM/SW (ATS): M51~M99
MW (ATS): M26 ~ M50
FM/SW (manual storage): M1 ~ M50
MW (manual storage): M26 ~ M50
Note:
1. To have better reception, go near a window or outdoor
when using ATS function.
2. Fully extend the Telescopic antenna when tuning into
FM/SW stations.
3. Do not use ATS while charging the unit to avoid
interference
STORING STATIONS MANUALLY
Select your desired station, press the [MENU] button and
rotate the [TUNING] knob to select [SAVE], then rotate the
[TUNING] knob to select memory location from 1~50
AUTO TUNING STORAGE (ATS)
In radio mode, press the [MENU] button and rotate the
[TUNING] knob to select [ATS]. Press the [MENU] button
again to start auto scan and store the available stations