EasyManua.ls Logo

DEGEN DE1126 - PRESET RECORDING TIMER SETUP

DEGEN DE1126
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
- 96k BPS (40Kbps MP3 format, file stored in [MUSIC]
folder
3. Press the [MENU] button again to confirm your selection
and start recording. The timer on the top of the display
starts increasing
4. Press the [
] button to stop and auto store the
recorded file into the memory.
All recorded files can be located from the [MUSIC] or [VOICE]
folder of “Main Menu”.
Note: A shortcut to the recording function is to directly press
and hold the [ ● ] button.
PRESET RECORDING TIMER
1. Select [ALARM Set] in [Sys Set] mode and press the
[MENU] button. Now [New] appears on the display.
2. By pressing the [MENU] button again, [Normal Alarm,
Power off, Power on] appears.
3. Rotate the [TUNING] knob to select [Power on] and
press the [MENU] button. Now[Only Once / Daily]
shows on the display
4. Rotate the [TUNING] knob to select either [Only Once]
or [Daily], press the [MENU] button again to confirm and
enter the [Power on] timer setting.
5. Repeat the same steps as alarm time setting on page 5.
6. After setting up the [Power on] timer, press the [MENU]
button. The display now shows [Alarm SET], [YES / NO]
& [Do you want to add?].
7. Rotate the [TUNING] knob to select [YES], press the
[MENU] button to confirm and enter the following