DEGEN DE1126 - DETAILED TIME AND DATE SETUP; Setting the Device Time; Setting the Device Date

5
TIME SET
1. Select [Time] in [Sys Set] mode by rotating the [TUNING]
knob
2. Press the [MENU] button; while the hours indicator flashes;
rotate the [TUNING] knob to adjust the hour,
3. Press the [MENU] button; while the minutes indicators
flashes, rotate the [TUNING] knob to adjust the minute
4. Press the [MENU] button; while the seconds indicator
flashes; rotate the [TUNING] knob to adjust
5. Press the [MENU] button or wait for 5 seconds to confirm
and exist the time setting.
Note: If you take out the battery, you will need to reset the
clock.
DATE SET
1. Select [Date] in [Sys Set] mode
2. Press the [MENU] button; while the indicator for year
flashes, rotate the [TUNING] knob to adjust the year
3. Press the [MENU] button to confirm and enter month
setting, then rotate the [TUNING] knob to adjust the month
4. Press the [MENU] button to confirm and enter the day
setting
5. Rotate the [TUNING] knob to adjust the day and press the
[MENU] button again to confirm and exist.
Rotate the [TUNING] knob to select your desired date format
and then press the [MENU] button again to confirm.
CALENDAR INFO
Select [Calendar info] in [Sys Set] mode, press the [MENU]
button to display the calendar information for about 10
seconds.