14
© 1990, 1996 Directed Electronics, Inc.
Disarming the VRS
®
Take the time to familiarize yourself with the VRS trigger sequence and the
disarm procedure. It is important to recognize the VRS and know how to dis-
arm it in case of accidental activation. Disarming the VRS is always the same
whether it is triggering or not. Once again, if VRS is armed, it does not disarm
automatically. You must disarm it the next time you operate the vehicle. You
must manually disarm it following this procedure:
With the ignition key in the "RUN" position, press
the VRS button, NOT the arm/disarm button on
the remote control). Remember, neither the
transmitter nor the Valet button will disarm the
VRS feature. Only the hidden arm/disarm button
can disarm VRS
©
.
To Next Page
Loading...