Deif ASC 150 Solar - Display, Buttons and Leds

More information
See the ASC 150 Solar data sheet for the variations on the grid-tied and off-grid arrangement.
You can select the plant mode for the AGC Mains controller when you have a power management system.
ASC Solar configuration
Basic settings > Application type > Type
Parameter
Name Setting
6071 Operation mode Power management
AGC Mains configuration
Basic settings > Application type > Plant type > Plant mode
Parameter
Name Setting
6070 Plant mode
Select a plant mode (in the AGC mains
controller). For example, Mains Power Export.
2.3 Display, buttons and LEDs
No. Name Function
1 Power
Green: The controller power is ON.
 The controller power is OFF.
2 Display screen*
Resolution: 240 x 128 px.
Viewing area: 88.50 x 51.40 mm.
Six lines, each with 25 characters.
3 Navigation Move the selector up, down, left and right on the screen.
4 OK Enter the Menu system.
OPERATOR'S MANUAL 4189341347A EN Page 7 of 32