-6-
4. Charging
The TC-1 has a built-in, rechargeable Lithium-Polymer battery. The battery is
charged using the included Type-C charging cable connected to a DC adapter (not
included). The power LED glows green when the battery is in the clear. The color
changes to red when there is about 30 minutes of operation left.
* When charging, the power LED will flash between red and green.
* When fully charged, the power LED stays green.
* Charging at temperatures below 10 degrees will cause damage to the battery.
A full charge takes 3 hrs for up to 24 hrs operation time. The battery is replaceable if
performance has declined after years of use.
5. Built-In Microphone
The TC-1 has a small built-in microphone on top of the device. It can be used to
record reference sound on DSLR cameras or devices with a stereo 3.5 mm mic input.
The built-in microphone can only be used, when working at MIC level with plug-in
power switched on at the camera side. By using the included 3.5mm TRS cable, the
timecode signal will be recorded on the left channel and reference sound will be
recorded on the right channel.
To Next Page
Loading...