dejavoo P1 - Terminal Operations; Reprint Receipt; Call Me Feature; Edit Tips by Transaction #

QUICK REFERENCE GUIDE
P1 terminal with Cash Discount
REPRINT RECEIPT
1. From the idle prompt, tap the icon to access the
FAVORITES menu.
2. Tap REPRINT RECEIPT.
3. If prompted, input PASSWORD (default password is
last 4 digits of your TPN).
4. Press and enter transaction # or last 4 digits of
card #, select transaction and tap.
5. Follow prompts and transaction receipt prints.
CALL ME FEATURE (must be enabled)
1. From the terminal main screen tap the icon.
2. Tap CALL ME, under the Support Menu and choose
reason. Enter your call back number.
3. The terminal sends notication to the help desk and
you will receive a call back from a representative with
assistance.
EDIT TIPS BY TRANSACTION #
1. From the idle prompt, tap the icon to access the
FAVORITES menu.
2. Tap ADJUST TIP.
3. If prompted, input PASSWORD (default password is
last 4 digits of your TPN).
4. Enter transaction #, scroll through transactions using
or swipe through transactions.
5. Tap TRANSACTION #.
6. Tap on button and a prompt will appear asking if
you want to submit tip adjust, tap YES. A screen will
appear conrming the success of the procedure.
SETTLE DAILY BATCH
1. From the idle prompt, tap the icon to access the
FAVORITES menu.
2. Tap SHOW/SETTLE DAILY BATCH.
3. If prompted, input PASSWORD (default password is
last 4 digits of your TPN).
4. The terminal will fetch and display a summary report.
Swipe left to view a detailed report.
5. Tap SETTLE button in the top right corner. A prompt
may appear if there are untipped transactions. Answer
YES or NO to continue to settle.
6. Settlement Report prints.
PRINTING REPORTS
1. From the idle prompt, tap the icon to access the
FAVORITES menu.
2. Choose OPEN BATCH or CLOSED BATCH.
3. Tap desired report type, select how you want the report
to group your transactions. For summary report or daily
report. Tap NEXT.
4. Swipe left to go from summary to details report and tap
on
5. REPORT prints.
TERMINAL POWER OFF / REBOOT
1. Press the button on the side of the terminal and
hold down until a menu appears on the screen, with the
following options: POWER OFF, REBOOT.
2. Select the option you desire by tapping the screen.
WIRELESS CAPABILITIES
Wi-Fi icon will blink when not connected.
It will remain static when connected
successfully.
Battery charge indicator.
To get an internet connection via ethernet, rst
plug the device into power and then use an
ethernet cable to plug into the ethernet port.
ipossystems.com
A DIVISION OF