Dejavoo Systems Instruction Manual V525.15 71
ADJUSTING THE PRINTER CONTRAST
Use the steps below to adjust the contrast for the terminal’s printer.
1.
From the idle prompt press the OK key to access
the Core Menu.
2.
NON TOUCH SCREEN TOUCH SCREEN
Using the down arrow
key highlight the word
UTILITY and press OK
* If prompted input
password, default is 1234
Using your fingertip
TAP the word UTILITY
* If prompted input
password, default is 1234
3.
NON TOUCH SCREEN TOUCH SCREEN
Using the down arrow
key highlight the word
SETTINGS and press
OK
Using your fingertip
TAP the word
SETTINGS
4.
NON TOUCH SCREEN TOUCH SCREEN
Using the down arrow
key highlight the word
OK
Using your fingertip
TAP the word
PRINTER
5.
NON TOUCH SCREEN TOUCH SCREEN
Use the up" and
down# arrow keys or
the Use the F2 and F4
keys to increase and
decrease the printer
contrast as desired.
Press OK to save your
setting.
Tap the __+ to
increase Display
Contrast or
Tap the __- to
decrease the printer
contrast.
Tap the word VALID to
save your settings.
6.
Terminal returns to the Settings main menu.
Settlement ->
Reports ->
Favorites ->
Utility ->
Settlement ->
Software Downalod ->
Communications ->
Favorites ->
Date and Time ->
Display ->
Keyboard