General Tool Safety Warnings
Read all safety warnings and all instructions. Failure to follow all warnings and
instructions may result in electric shock, fire and/or serious injury. Save all warnings and
instructions for future reference. For safety reasons, people who are not familiar with
these operating instructions should not use this Submersible Pump.
Before Start-up, Note The Following!
Mains Supply
Your new submersible pump is equipped with a shock-proof plug according to
regulations.the pump is designed to be connected to a 100-120V~50/60Hz(for final and
correcct voltage /frequency info, please refer to the rating label on the product) safety
socket. Make sure that the socket is sufficiently secured and is in excellent condition.
Introduce the plug into the socket and the pump is ready to go.
⚠ WARNING: If the mains cable or plug suffers any damage from external action,
repairs to the cable should be serviced by a qualified specialist using only standard
spare parts. This will ensure that it meets the required safety standards.
Always check the pump (above all power cable and plug) before each operation. A
damaged pump must not be used. It is absolutely necessary to have the pump
checked by your electrician.
Take care that the electrical connections are made within a dry area, protected
from flooding.
Protect plug and power cable from heat, oil and sharp edges.
Check line voltage. Data indicated on the type plate must match technical data of
the main supply.
Children under the age are not allowed to operate the pump. Keep them away from
the connected unit.
Before use, first clear the outlet.
Circulation of aggressive fluids,as well as the circulation of abrasive Materials must
be avoided at all costs.
The submersible motor-driven pump must be protected from frost.
The pump has no self-stop function. In order to prevent the pump from running dry
or other faults, it is necessary to ensure that the pump is kept in observation during
operation.
To Next Page
Loading...