Delem
V1101, 3.0
3 Y-axis and general parameters
In this chapter the general machine parameters and parameters of the Y-axis are described. Each
parameter explanation comprises the following items:
• Parameter number. Each parameter has a unique number or code.
• Parameter name. Each parameter has a unique name.
• Range. The maximal value and minimal value that can be programmed.
• Default. The initial value of this parameter. This is also the value after an initialisation.
• Units. The unit of the parameter (s, mm, kg, DA-points, etcetera).
• Function. The function of the parameter.
• Description. Full description of the use and meaning of the parameter.
Standardly all parameters are valid for all controls mentioned in this manual. If there are
exceptions then this is indicated.
To Next Page
Loading...
