Delfast Prime 2018 - Operating the Bike and Remote; Engine Start;Stop Button; Remote Control Functions; Control Panel and Signaling

6. TURNING THE BIKE ON AND OFF
Push the ENGINE START/STOP buon on the
bike or use the supplied remote control.
The remote control has the
following buons:
Search: Your bike
makes a beep sound.
Turn ON / OFF the
motor power.
Unlock: Deacvate the
alarm.
Lock: Acvate the alarm.
7. FUNCTION BUTTONS
LIGHT CONTROL BUTTON is used to
turn the headlamp o and on.
TURN SIGNAL SWITCH is used
to indicate right or le turns
by switching the lever to the
appropriate posion, indicated
by arrows. The corresponding
turn indicator will be acvated
on the front and rear blinkers.
SIGNAL BUTTON or HORN is used to
provide audible signals to other road
users. Note that here may be restricons
on the use of the horn in some instances.
THE THROTTLE GRIP is twisted to add or reduce speed.