Need help?Do you have a question about the Delfast Prime 2018 and is the answer not in the manual?
Prepare the e-bike by unpacking all components and removing packaging.
Securely attach the wheels and correctly align the front fork.
Install pedals and handlebars, ensuring all hardware is tightened properly.
Verify the assembled bike matches the expected configuration.
Ensure the battery is fully charged before the first ride.
Understand the LED indicators on the charger for charging status.
Use only the specified chargers for the battery to prevent damage.
Follow safety guidelines, including not leaving the bike unattended and regular charging.
Adjust seat height and handlebar tilt for optimal riding position.
Avoid exceeding the maximum height markers for safety.
Note that motorcycle saddles are pre-adjusted at the factory.
Inflate tires to the pressure specified on the tire sidewall.
Confirm that the front and rear brakes engage correctly.
Use the dedicated button on the bike to turn the motor on or off.
Utilize the remote for bike functions like search, power, and alarm control.
Operate the headlamp using the dedicated control button.
Activate turn signals by moving the lever to the correct position.
Use the signal button to alert other road users.
Control the bike's speed by twisting the throttle grip.
Select the 32 km/h mode for compliance with US Class 2 e-bike regulations.
Select the 25 km/h mode for compliance with EU e-bike regulations.
Use the 'no limits' mode for off-road riding, adhering to local regulations.
Understand the difference between Pedal Assist System and throttle-based operation.
Access information on battery charge, speed, and mileage via the display.
Learn how to select information and navigate display settings.
General| Motorcycle Type | Electric |
|---|---|
| Year | 2018 |
| Charging Time | 4-5 hours |
| Max Load | 150 kg |
| Brakes | Hydraulic disc brakes |
| Suspension | Front and rear suspension |
| Motor Power | 3000 W |
| Max Speed | 55 km/h |
To Next Page