Operation Section
- 20 - EN
3.1 Installation
Warning!
Before installing the vacuum cleaner, carefully make a sight check to pinpoint any damage
suffered during transport.
In the event of any component parts being damaged, do not proceed with installation. Notify the
manufacturer and reach an agreement on how to proceed.
The vacuum cleaner already features a suction filter.
Fit the accessory required for the type of vacuuming operation on the opposite end of the hose.
Note: No standard accessories (reducers, hoses, nozzles) are included with the vacuum;
accessories must be specified and ordered separately.
Contact your dealer for information relating to the different types of
optional accessories
available
for this specific vacuum cleaner model.
Fit the supplied pipe on the connector.
To Next Page
Loading...
