Operation Section
- 24 - EN
3.3 Work cycle
Warning!
Before fitting the plug, make sure the power voltage corresponds to that on the CE marking
plate.
➢ Make sure the power plug is correctly fitted in the power socket.
➢ Make sure the flexible hose is properly fitted and locked in the vacuum pipe union.
➢ Make sure the power cable and any extension used are integral and in perfect condition.
➢ Block the vacuum cleaner by means of the retainer provided.
➢ Grip one end of the flexible hose complete with selected accessory.
➢ Press the
Start
button and start vacuuming.
➢ To stop the vacuum cleaner, press the
Stop
button
Warning!
Before switching the vacuum cleaner back on, make sure the motors have come to a complete
halt.
➢ After finishing work, disconnect the vacuum cleaner from the power socket.
To Next Page
Loading...
