Operation Section
- 29 - EN
➢ Open the flap as indicated in the picture below allowing the air to flow into the filtering
chamber thus providing a counter air flow that passes through the filter. Repeat this
operation for at least 5 times.
➢ Once the cleaning process has finished, remove the cap from the suction inlet and connect
the accessories to continue the vacuum process.
➢ If the orange light indicator is still on, repeat the filter cleaning process. If after this second
cleaning process the orange light is still on, replace the filter with a new one.
Warning!
During vacuuming, avoid rolling up or twisting the flexible hose
Warning!
Never use the machine with the filter blocked.
To Next Page
Loading...
