Delimano MULTIFRESH - Ml Cup; Food Processor and Its Attachments; Whisk; Chopping Blade

9
• Assemble the blade assembly to the cup by rotating it clockwise until cup’s indicator points on the doted locked eld marked on the blade assembly (see Pictures, pic. 7a)).
• Place the cup onto the main unit and rotate it clockwise until you hear »click« sound (see Pictures, pic. 7b)).
• Rotate the knob to mode B - you will hear the beep sound when in position and the mode light will start to ash. Press the knob to start the B cycle, you will hear the beep sound and
the mode light will turn on (see Pictures, pic. 14). After the cycle is completed, the device will stop and switch to stand by mode automatically. The mode light will start to ash again.
• Blending cycle: 3 x pulsing + 30 s blending
• Disassemble the cup from the main unit by turning it counter clockwise before lifting it.
200 ML CUP
• Fill the cup with ingredients (seeds, coee beans, nuts, spices, etc.).
• NOTE: Use for dry ingredients only. The content should never exceed the MAX level (see Pictures, pic. 15).
• Assemble the blade assembly to the cup by rotating it clockwise until cup’s indicator points on the doted locked eld marked on the blade assembly (see Pictures, pic. 16a)).
NOTE: Place the cup onto the main unit and rotate it clockwise until you hear »click« sound (see Pictures, pic. 16b)).
• Rotate the knob to mode B - you will hear the beep sound when in position and the mode light will start to ash. Press the knob to start the B cycle, you will hear the beep sound and
the mode light will turn on (see Pictures, pic. 14). After the cycle is completed, the device will stop and switch to stand by mode automatically. The mode light will start to ash again.
• Blending cycle: 3 x pulsing + 30 s blending
• Disassemble the cup from the main unit by turning it counter clockwise before lifting it.
• NOTE: Due to high speed blades and friction ingredients might be hot. Avoid direct contact with them or cups axle.
FOOD PROCESSOR AND ITS ATTACHMENTS
• Place the food processor cup onto the main unit and rotate it clockwise until you hear »click« sound (see Pictures, pic. 17 a)).
• Select the desired attachment and assemble it into the food processor cup (see Pictures, pic. 17b)).
• Fill in the ingredients (when using the whisk or chopping blade attachment) between MIN and MAX line (see Pictures, pic. 17 c))or either add the food through feeding chute (when
using grating/julienne/slicing attachment).
• Cover the cup with lid and lock it in a clockwise direction to align the arrows on the lid and cup’s handle (see Pictures, pic. 17d)).
• Use the feeder or/and pusher to add the food (see Pictures, pic. 17 e)).
• Rotate the knob to mode B - you will hear the beep sound when in position and the mode light will start to ash. Press the knob to start the B cycle, you will hear the beep sound and the
mode light will turn on (see Pictures, pic. 17 h,i). After the cycle is completed, the device will stop and switch to stand by mode automatically. The mode light will start to ash again.
• Cycle: 30 s food processing
A) WHISK
• Slide the whisk over the center axle of the food processor (see Pictures, pic. 17b))
• Fill the cup with ingredients.
NOTE: Mind the min and max liquid level (see Pictures, pic. 17 c)).
• Cover the cup with lid and lock it in a clockwise direction to align the arrows on the lid and cup’s handle (see Pictures, pic. 17 d)).
• Start the B mode (see Pictures, pic. 17 h,i) and whisk until desired result is reached.
B) CHOPPING BLADE
• Slide the chopping blade over the center axle of the food processor (see Pictures, pic. 17 b)).
• Fill the cup with ingredients.
• Cover the cup with lid and lock it in a clockwise direction to align the arrows on the lid and cup’s handle (see Pictures, pic. 17 d)).
Start the B mode (see Pictures, pic. 17 h,i) and chop until desired result is reached. NOTES: You can add additional food through the feeder if needed.
If food gets stuck, use the PULSE button (see Pictures, pic. 24) to re-shake the ingredients.
You can remove top set of blades if needed or for cleaning by turning top part clockwise before sliding it o the bottom part (see Pictures, pic. 18). Reverse the operation to assemble the
blades sets together (“click” sound).
NOTE: Be careful when manipulating. Sharp blades. To prevent injuries make sure to have a good grip and use old, thick cloth to wrap the blades before dis/assembling to avoid injuries.
C) GRATING/JULIENNE/SLICING ATTACHMENT
• Select the desired blade (see Pictures, pic. 17f)).
• Insert selected blade into the blade disc and gently press it down (see Pictures, pic. 17 g)).
• Cover the cup with lid and lock it in a clockwise position to align the arrows on the lid and cup’s handle (see Pictures, pic. 17 d)).
• Start the B mode (see Pictures, pic. 17 h,i) and chop until desired result is reached.
• To disassemble the blade from disc, press on blade’s lip from bottom side to lift (see Pictures, pic. 17 j)).
NOTE: the blades are extremely sharp, handle with care.
Cup disassembling/assembling method:
• Disassembling: Always remove any attachment from cup before disassembling the gearing. Press the switch at the bottom of the processor cup with one hand while rotating the
detachable gearing clockwise before lifting it from the cup (see Pictures, pic. 19 a, b)).
• Assembling: match mark lines, push and rotate it counterclockwise until you hear »click« sound (see Pictures, pic. 19c)).
• NOTE: Wash the detachable gearing under running water. The cup without detachable gearing is dishwasher safe.
HEATING JUG (blending)
Fill in the ingredients up to the MAX line marked on the heating jug (see Pictures, pic. 21).
NOTE: The content should never exceed the MAX level.
NOTE: The food should always be covered with water and cut to at least 2 x 2 x 2 cm pieces.
• Cover the jug with lid and lock it in (rotate it clockwise) position where arrows on the lid and jug’s handle align (see Pictures, pic. 22 a)).
• Lift the jug onto the main unit and press it slightly down until your hear »click« sound, which indicates that the jug is connected properly (see Pictures, pic. 22 b)).
• Rotate the knob to mode B - you will hear the beep sound when in position and the mode light will start to ash. Press the knob to start the B cycle, you will hear the beep sound and
the mode light will turn on (see Pictures, pic. 14). After the cycle is completed, the device will stop and switch to stand by mode automatically. The mode light will start to ash again.
• Cycle: 30 s blending
4.1.5 MODE HB: HEATING & BLENDING (Creamy Soup Mode)
USE WITH HEATING JUG.
• Fill in the ingredients up to the MAX line marked on the jug (see Pictures, pic. 21).
NOTE: The content should never exceed the MAX level.
NOTE: The food should always be covered with water and cut to at least 2 x 2 x 2 cm pieces.
• Cover the jug with lid and lock it in (rotate it clockwise) position where arrows on the lid and jug’s handle align (see Pictures, pic. 22 a)).
• Lift the jug onto the main unit and press it slightly down until your hear »click« sound, which indicates that the jug is connected properly (see Pictures, pic. 22 b)).
• Rotate the knob to mode HB - you will hear the beep sound when in position and the mode light will start to ash. Press the knob to start the HB cycle, you will hear the beep sound and
the mode light will turn on (see Pictures, pic. 23). After the cycle is completed, the device will stop and switch to stand by mode automatically. The mode light will start to ash again.
• HB cycle (heating up to max 70 °C +15 min cooking at 70°C + 3 x pulsing + 90 s blending).