Need help?Do you have a question about the Dell EMC PowerVault ME484 and is the answer not in the manual?
General| Product Type | Storage Enclosure |
|---|---|
| Interface | 12Gbps SAS |
| Supported Drive Types | SAS, SATA, SSD |
| Connectivity | 12 Gbps SAS |
| Power Supply | Dual, hot-swappable |
| Cooling | Redundant, hot-swappable fans |
| Width | 482.6 mm (19 inches) |
| Drive Bays | 84 (12G SAS) |
Defines the ME484 JBOD storage enclosure and its hardware components.
Specifies operating system and minimum hardware requirements for ME484 JBOD setup.
Addresses LUN reattachment failures on Linux hosts after failover.
Lists other product documentation and Dell support resources for the ME484 JBOD.
Details rack mounting rails for 19-inch cabinets and installation considerations.
Provides step-by-step instructions for securely mounting the ME484 JBOD into a server rack.
Describes the DDIC, its features, and how disks are inserted into it.
Provides guidelines for installing DDICs into the ME484 JBOD drawers, including placement rules.
Discusses methods and factors for cabling ME484 JBOD to host servers and other enclosures.
Outlines cable types and length limits for connecting expansion enclosures.
Explains three distinct configurations for cabling the ME484 JBOD to host systems.
Details the cabling for a single Host Bus Adapter (HBA) connected to one JBOD.
Describes configurations for one HBA connecting to several ME484 JBOD storage enclosures.
Details cabling for a server with two HBAs and multiple ME484 JBOD storage enclosures.
Recommends best practices for labeling SAS cables that connect to the host server.
Explains LEDs on expansion modules and Disk Drive Carriers (DDICs) for status indication.
Details LEDs on enclosure drawers and Fan Cooling Modules (FCMs) for fault identification.
Describes the Ops panel indicators and LED states for Power Supply Units (PSUs).
Instructions for installing PowerTools Server Hardware Manager on Windows via GUI or command line.
Instructions for installing PowerTools Server Hardware Manager on Linux via GUI, console, or silent console.
To Next Page
