Dell EMC VMAX - Examine the Device Identities Following a Cutover

34
EXAMINE THE DEVICE IDENTITIES FOLLOWING A CUTOVER
The device IDs used on the source and target devices have not changed following the Cutover operation. The target devices are still
using the effective WWN of the source devices. The source devices still have the same native and effective IDs.
Source device:
C:\>symdev show 0158 -sid 3184
Device Physical Name : Not Visible
Device Symmetrix Name : 00158
Device Serial ID : N/A
Symmetrix ID : 000195703184
Number of RAID Groups : 0
Encapsulated Device : No
Encapsulated WWN : N/A
Encapsulated Device Flags: None
Encapsulated Array ID : N/A
Encapsulated Device Name : N/A
Attached BCV Device : N/A
Attached VDEV TGT Device : N/A
Vendor ID : EMC
Product ID : SYMMETRIX
Product Revision : 5876
Device WWN : 60000970000195703184533030313538
Device Emulation Type : FBA
Device Defined Label Type: N/A
Device Defined Label : N/A
Device Sub System Id : 0x0001
Cache Partition Name : DEFAULT_PARTITION
Bound Pool Name : lcseb245-246
Device Block Size : 512
Device Capacity
{
Cylinders : 54614
Tracks : 819210
512-byte Blocks : 104858880
MegaBytes : 51201
KiloBytes : 52429440
Geometry Limited : No
}
Device External Identity
{
Device WWN : 60000970000195703184533030313538
...
Target device: