4
Vertical frequency range: 56 to 76 Hz (excluding UXGA
resolution)
(2) Video modes Preset Modes 10 ea. factory preset timings.
User Mode Any video modes for which the timing is not recognized
as a preset but included in the synchronization range is
stored in user area. 5 ea. user defined timings.
Mode tolerance Monitor recognizes preset modes within a range of ±
0.5KHz for horizontal frequencies and within ± 0.5Hz
for vertical frequencies.
2.2.4 SCALING
Function Monitor is able to scale-up the image of the specified
video signal from computer at specified resolution
frequency smaller than 1600×1200 60Hz. Image is
automatically expanded to fill the entire screen. The
‘specified’ means a signal timing corresponding with
one of the preset modes.
2.2.5 Auto-Adjustment
Function For any preset mode, monitor is able to automatically
adjust horizontal and vertical position, phase and clock
parameters to achieve the best image quality, the image
will be perfectly centered and noise exempted. For
UXGA Vs>60Hz , this function can not be guaranteed.
Compatibility modes Auto-adjustment ensures full specification for listed
Preset Modes (UXGA, Vs >60Hz modes not included). It
is acceptable the auto-adjustment fails clock adjustment
operation when a non-factory preset mode presents. In
such case, end user has the possibility to adjust
horizontal and vertical position, phase and clock with the
OSD menu.
2.2.6 USER CONTROL AND INDICATORS
(1) Indicators Power LED color Full power: Green
DPMS sleep: Amber
Input LED color Input selected: Green
Non-selected: Off
(2) Key buttons Power control To power up/down the monitor
Auto-adjustment To perform auto-adjustment
Input selector To index to the next input source
Menu To activate the OSD
Down/Up To select between the items on OSD.
Direct adjustment of brightness & contrast (Up/Down buttons)
(+)/(-) To adjust the value of the item on OSD.
To Next Page
Loading...
Need help?
General