UsingYourProjector:Dell™4100MPProjectorUser'sGuide
Control Panel
Remote Control
On-Screen Display
See "Powering On/Off the Projector."
Increases or decreases the speaker volume.
Switches the display mode to PC Mode, Movie Mode, Game Mode, sRGB Mode, User Mode.
Press to step through Analog RGB, Composite, Component-i, S-video, and Analog YPbPr sources, and photo image from the card reader (Optional
accessory) when multiple sources are connected to the projector.
Press to synchronize the projector to the input source.
Auto-Adjust will not operate if the OSD (On-Screen Display) is displayed.
Press to activate the OSD. Use the directional keys and Menu button to navigate through the OSD.
The four directional keys can be used to navigate through the tabs in the OSD.
Press or button to adjust image distortion caused by tilting the projector.