76 Driver Installation
4
From the screen that displays, go to the
Storage Adapter
screen to install
the MegaRAID SAS driver.
5
Delete any existing RAID adapter listings.
6
Press <Insert> to add unlisted drivers.
7
Press <Insert> again.
A path is displayed.
8
Press <F3>.
9
Insert the driver diskette in the diskette drive, and press <Enter>.
The system finds the
.HAM
driver.
10
Press <Tab>.
11
Select the
Driver Summary
screen, and press <Enter>.
12
Continue the Novell NetWare installation procedure.
Installing or Updating the NetWare Driver in an Existing NetWare System
Perform the following steps to add the Novell NetWare driver to an existing
installation:
1
At the root prompt, type
hdetect
and press <Enter>.
The
Configuration Options
screen is displayed.
2
From the screen that displays, go to the
Storage Adapter
screen to install
the MegaRAID SAS driver.
3
Delete any existing RAID adapter listings.
4
Press <Insert> to add unlisted drivers.
5
Press <Insert> again.
A path is displayed.
6
Press <F3>.
7
Insert the driver diskette in the diskette drive, and press <Enter>.
The system finds the
.HAM
driver.
8
Press <Tab>.
9
Select the Driver Summary screen, and press <Enter>.
10
Continue the Novell NetWare installation procedure.
Dell_PERC6.2_UG.book Page 76 Wednesday, June 24, 2009 6:08 PM
To Next Page